(ATI) hardware provides users with an extremely competitive and accurate solution to fit their needs. In order to ensure our products maintain the same level of precision and high reliability, it’s required that they be sent in for recalibration annually. Hardware such as the EMX Data Acquisition Series, EDAQ16P Pulse Input Module, DLX Datalogger Module, and Ignition Timing Meter (IGTM-2000) all require annual calibration. Recalibration is a service offered at ATI with quick turnaround times to reduce any down time to the user while the equipment is being tested.

ATI is pleased to announce that it has entered into a sales and commercial partnership with CANWAY Technology Engineering. CANWAY is a German based company known for producing high end electronics specializing in Digital Signal Processing (DSP) and Embedded Computing. Established in 1992, CANWAY has provided solutions for the automotive industry and energy sector for over 25 years. This partnership, which covers several key sales territories in Europe, the Americas and beyond, provides ATI customers with new innovative products for data acquisition and test cell measurement with same high reliability and intuitive designs they are accustomed to.

ATI is pleased to announce that it has entered into a sales and commercial partnership with CANWAY Technology Engineering. CANWAY is a German based company known for producing high end electronics specializing in Digital Signal Processing (DSP) and Embedded Computing. Established in 1992, CANWAY has provided solutions for the automotive industry and energy sector for over 25 years. This partnership, which covers several key sales territories in Europe, the Americas and beyond, provides ATI customers with new innovative products for data acquisition and test cell measurement with same high reliability and intuitive designs they are accustomed to.

Accurate Technologies Inc. (ATI) is pleased to announce that it has entered into a sales and commercial partnership with German based Klaric GmbH & Co.KG. The agreement, which covers several key sales territories in Europe, the Americas and beyond, leverages the synergies between ATI’s measurement and calibration competencies and Klaric’s competitive advantage in the high voltage sector.

(ATI) proudly offers the latest generation of PICOTURN compact controllers. The PTCM V1.1 system brings a proven rugged, reliable, simple, accurate and cost effective solution to rotational speed sensors for turbochargers. The system’s functional principle is a 1MHz pulse induction with eddy current discrimination, using a compressor mounted solenoid sensor that detects and counts compressor vanes individually, generating a standard TTL/CMOS output signal.

Accurate Technologies Inc. (ATI), the leading independent global supplier of control system development tools, has launched the latest evolution of its leading network analysis tool, CANLab.

Accurate Technologies (ATI) is renowned for its user-friendly measurement, calibration and diagnostics software. And now, to align with contemporary market trends, ATI’s industry leading software packages including VISION, No-Hooks/On-Target and CANLab will shortly be available via a subscription model, for leasing in monthly increments with a cumulative duration discount.

The EMX data acquisition device provides an unrivaled level of performance and precision in a compact and rugged enclosure. Boasting an industry leading cost per channel advantage, a single EMX is capable of measuring up to 30 thermocouples while maintaining remarkable accuracy. Many competitor products would require up to 4 devices to match a single EMX’s high thermocouple channel count.

The new version CANLab (5.0) now possesses the ability to interface with Flexible Data Rate CAN (CAN FD) hardware devices (Kvaser, ATI branded Kvaser, and Vector,) in addition to familiar CAN and LIN devices. Beneficial features used for analyzing a CAN bus are now supported for CAN FD message traffic (i.e. Bus Statistics, Tracing, Playback, etc.). CAN FD support within CANLab is a simple extension of the existing usage with CAN, therefore minimal new training is required.

ATI Accurate Technologies India Private Ltd returns to the Symposium on International Automotive Technology (SIAT), at Oxford Golf Resort - Hill Top, Mumbai Bangalore Highway, Bavdhan, Pune 411 04516–18 January 2019.

VISION 5.2 is feature rich and offering improvements designed for the quality and performance that VISION users are accustomed to, one of VISION 5.2’s flagship features is support for ‘floating’ windows. The floating window feature delivers improved workflow and efficiency by allowing the VISION workspace to share multiple monitors (i.e. HDMI, Display Port, USB, etc.) to provide greater user interface flexibility.

Accurate Technologies Inc. (ATI) has unleashed the full potential of the EMX Data Acquisition Module using the speed advantage of Ethernet connectivity. Ethernet provides the bandwidth necessary to take full advantage of the high-speed sampling capabilities of the HSA8D IOM module that was not previously possible over CAN. Connecting the EMX over Ethernet allows for larger packages of data to be transferred at faster speeds, resulting in the ability to operate all the EMX high-speed channels simultaneously.

CANary FD is the latest interface in ATI’s CAN Bus product portfolio, offering 4 CAN channels that support Flexible Data Rate CAN networks (CAN FD) in a compact, ruggedized enclosure. Each of the 4 CAN channels are galvanically isolated from channel to channel and USB to channel to provide better signal integrity in demanding environments. In addition, the unit's 4 channels benefit from individual mechanically switchable CAN termination that provides persistent termination even when the CANary FD is not powered, thus eliminating the need for external termination resistors.

With a focus on customer needs, Accurate Technologies Inc. (ATI) has developed version 5.1 of its VISION™ Calibration and Data Acquisition Software, which offers several new features and improvements. Amongst these is CAN FD (CAN with Flexible Data-Rate) support. CAN FD offers increased throughput due to the increased message lengths and faster bit rates. CAN FD provides a platform to acquire more data and to speed up download and flashing operations. In addition, VISION is now able to stream data directly to an ASAM MDF 4.1 file when recording data. 

ATI announces two new additions to its range of ATI Kvaser CAN Bus solutions that offer considerable integration advantages with the firm's powerful VISION Software. With the anticipation of VISION 5.1 release, ATI Kvaser solution users will soon benefit from complete plug and play connectivity with the 'Base' version of VISION Software. This ensures complete compatibility with any ATI Kvaser product across the VISION software portfolio without incurring the additional cost of a 3rd Party Interface Toolkit.

Accurate Technologies Inc. (ATI) proudly announces the release of an Ethernet version of its A8 Electronic Control Unit (ECU) Serial Interface modules. With the rollout of Ethernet, the ATI A8 Serial Interface modules will be easier to implement, fit into more locations, and heighten productivity for automotive ECU development.

Accurate Technologies Inc. (ATI) highlighted its comprehensive toolchain for measurement, calibration and diagnostics (MCD) at the recent 19th Automotive Testing Expo Europe, held at the Messe Stuttgart, Germany, on 20-22 June. For 2017 the firm took its biggest ever stand for the event and reported strong levels of interest amongst the international attendees.

ATI announces the availability of two new cables which enable use of existing EDAQ break out boxes (BOBs) with EMX Data Acquisition Modules without requiring sensor connection modifications. Cable number 150-0223 connects an EDAQAI or P BOB to a B-chassis (which has a 64-pin Autosport connector) EMX Module. The second cable, number 150-0222 connects an EDAQAI or P BOB to an A-chassis (which has a 41-pin Autosport connector) EMX Module. Example user applications are shown below.

Representing the largest industry specific show on the global calendar, ATI is busily preparing its biggest ever booth for the 19th Automotive Testing Expo Europe at Messe Stuttgart, June 20th – 22nd.

Configuration of the ATI Vehicle Information Display (VID) is now even easier thanks to the upgraded configuration software recently introduced with VISION 5.0.

Accurate Technologies’ measurement, calibration and diagnostics (MCD) hardware and software products once again prove their worth in a motorsport environment, this time courtesy of the University of Michigan-Dearborn Formula SAE team. A long-established series, Formula SAE (FSAE) is a collegiate design competition with participants from around the globe, in which students design, manufacture, and assemble a vehicle to participate in competitions hosted in various countries.

It is important to note that the EDAQ16P Pulse Counter Module is still available.

When Scandinavian public transport provider Nobina added hybrid electric buses to its fleet, it became imperative to understand their in-service behavior, especially bearing in mind the sheer volume of passengers that rely on the service and thousands of kilometers traveled per day.

The new Data Analyzer for MDF4 file formats is the highlight of the recently introduced VISION Tool Suite - VISION Calibration and Data Acquisition Software’s expansive and flexible platform for future features. The requirement for Data Analyzer has been driven by the fact that the MDF4 file format was pushing the limits of the existing VISION Data Analysis and Viewer, so an all-new architecture has been developed by Accurate Technologies’ Software Team.