DASH4ATI from Race Technology
The DASH4ATI from Race Technology is a compact and highly configurable data display. The DASH4ATI can connect directly to CAN using DBC files to decode and display CAN variables. When connected to an ECU interface DASH4ATI can display all the decoded ECU parameters. A sealed, compact and tough aluminum housing makes it a perfect fit for test drive, test track, testcell and rig environments.
The LCD display is a transflective and has the advantage of being visible in all lighting conditions. The transflective technology ensures it remains at a constant contrast ratio within all lighting conditions - from darkness and using the back-light to full direct sunlight.
Product Features:
- Easy to configure with their PC config tool
- Works with DBC files. Multiplex mode & J1939
- Setup five different screens
- Show number, text, bars, & graphs
- CAN send by button, to trigger other hardware or external applications
- Alarm function – warning LEDs
- Use together with supported CAN data loggers
Performance
Hardware
Mechanical
Pin Out
Performance
Performance
| Processor | 32bit DSP running at 150MHz. Internal Flash for program and configuration storage. |
| Number of configurable data pages | 5 |
| Number of objects per data page | 40 |
| Number of math channels | 10 |
| Display fonts | 5 sizes, from 5 to 64 pixels high |
| Maximum number of input data channels | potentially >1000 |
| Screen update rate | variables can be set to update between 1Hz to 10Hz |
Hardware
Hardware
| Connections | Single 9-way d-type, for serial communications, power and direct CAN connection |
| Power supply | Requires 12 to 24 VDC at approximately 100mA |
| Display | White backlit LCD, resolution 128 x 64 pixels |
| Membrane keypad | Polyester textured membrane to limit reflections. 12mm diameter buttons |
| Temperature range | Operation between 32°F to 122°F (0°C to 50°C), Storage from -4°F to 176°F (-20°C to 80°C) |
| LEDs | 2 rows of 6 very high brightness 5mm LEDs. 20 degree viewing angle. 10 steps of brightness control. |
Mechanical
Mechanical
| Case | Die-cast aluminum, black powder coated finish |
| Dimensions | 124mm x 58mm x 14mm/4.88in x 2.28in x .55in |
| Unit fixing | 4 x blind threaded holes for M4 screws, maximum depth 6mm/.24in |
Pin Out
| PIN | DESCRIPTION |
| 1 | CAN L |
| 2 | TX - Serial Data Out |
| 3 | RX - Serial Data In |
| 4 | N/C |
| 5 | GND |
| 6 | N/C |
| 7 | +12-24v In |
| 8 | CAN H |
| 9 | N/C |
All specifications are subject to change without notice.
