EMX 2.0 Data Acquisition Series
Measurement inputs typically provide a number of software configurable options per channel including advanced DSP filtering algorithms with selectable filter response characteristics and stop band frequencies to ensure repeatable and accurate measurements of the performance level that typically requires laboratory style equipment. Each channel also allows independent selection of its output data rate.
Flexible communication options are available including CAN/CAN-FD and Ethernet. When used with ATI software products like VISION, the EMX operates as a plug and play device and benefits from enhanced features including dynamic acquisition rates and automatic filter compensation.



Free Configuration Software for Third-party Tools
EMX Device Variants
Part Number | Enclosure | I/O Modules Installed | CAN | Ethernet |
160-0005 | B | HSA8D | HSA8D | SPS16 | ✓ | |
160-0006 | A | LSA8D | LSA8D | _______________ | ✓ | |
160-0007 | B | TC10 | TC10 | TC10 | ✓ | |
160-0008 | B | HSA8D | HSA8D | --- | ✓ | |
160-0009 | B | TC10 | TC10 | --- | ✓ | |
160-0010 | B | HSA8D | --- | --- | ✓ | |
160-0011 | B | HSA8D | --- | SPS16 | ✓ | |
160-0012 | A | TC10 | TC10 | _______________ | ✓ | |
160-0013 | A | LSA8D | TC10 | _______________ | ✓ | |
160-0014 | A | LSA8D | --- | _______________ | ✓ | |
160-0015 | A | TC10 | --- | _______________ | ✓ | |
160-0016 | B | LSA8D | LSA8D | LSA8D | ✓ | |
160-0017 | B | LSA8D | LSA8D | TC10 | ✓ | |
160-0018 | B | LSA8D | TC10 | TC10 | ✓ | |
160-0030 | B | HSA8D | HSA8D | SPS16 | ✓ | ✓ |
160-0031 | A | HSA8D | --- | _______________ | ✓ | ✓ |
160-0032 | A | HSA8D | TC10 | _______________ | ✓ | ✓ |
160-0033 | A | HSA8D | HSA8D | _______________ | ✓ | ✓ |
160-0034 | A | LSA8D | LSA8D | _______________ | ✓ | ✓ |
160-0035 | B | HSA8D | --- | --- | ✓ | ✓ |
160-0036 | B | HSA8D | TC10 | TC10 | ✓ | ✓ |
160-0037 | B | HSA8D | HSA8D | --- | ✓ | ✓ |
160-0038 | B | HSA8D | HSA8D | TC10 | ✓ | ✓ |
160-0040 | B | LSA8D | LSA8D | LSA8D | ✓ | ✓ |
160-0041 | B | TC10 | TC10 | TC10 | ✓ | ✓ |
160-0042 | B | HSA8D | LSA8D | TC10 | ✓ | ✓ |
HSA8D
HSA8D High Speed Analog Input Module (EMX 2.0 spec)

The HSA8D module offers uncompromising high-end measurement performance in a compact size, typically only found on much larger and more expensive instrumentation equipment. It is ideal for a variety of wide bandwidth precision measurements.
Analog Voltage Inputs |
Number of Inputs | (8) bipolar differential inputs |
Measurement Ranges | (26) ranges from ±25mV to ±70V, configurable per channel |
ADC Resolution | 16-bits |
ADC Sampling Type | Simultaneous time-aligned sampling of all channels |
Input Impedance | Ranges ≤ ±5V = >100MΩ Ranges > ±5V = >400kΩ When powered down = >100MΩ all ranges |
Overvoltage Protection | >100V |
Output Data Rate | Up to 10KHz per channel, configurable per channel (limited to 2KHz on CAN 2.0B) |
Anti-Aliasing Filter | 10th order precision Butterworth, cutoff 12.7KHz (can be disabled via software configuration) |
Configurable DSP Filter Characteristics | 8th order Bessel low-pass 16th order Bessel low-pass 8th order Butterworth low-pass 16th order Elliptical low-pass |
Filter Stop Band Settings (Hz) | 0.5, 1.0, 2.5, 5.0, 10, 25, 50, 100, 250, 500, 1K, 2.5K, 5K, 10K, 20K, or disabled via software configuration |
Sensor Power Outputs |
Number of Outputs | (2) sensor power outputs (may be shared by multiple sensors) |
Output Voltage | 3 to 15VDC, software configurable per output |
Output Current | 250mA maximum per output |
Output Protection | Short circuit protection with fault monitoring |

LSA8D
Low Speed Analog Input Module (EMX 2.0 spec)

The LSA8D module is the leader in cost-effective precision analog voltage measurement, offering wide measurement ranges that cover most applications, as well as configurable precision DSP filtering to ensure accurate anti-aliased data
Analog Voltage Inputs |
Number of Inputs | (8) bipolar differential inputs |
Measurement Ranges | (5) ranges from ±100mV to ±50V, configurable per channel |
ADC Resolution | 16-bits |
ADC Sampling Type | Simultaneous time-aligned sampling of all channels Ranges ≤ |
Input Impedance | ±5V = >100MΩ Ranges > ±5V = >200kΩ |
Overvoltage Protection | >100V |
Output Data Rate | Up to 2KHz per channel, configurable per channel |
Anti-Aliasing Filter | 4th order precision Butterworth, cutoff 1.58KHz |
Configurable DSP Filter Characteristics | 8th order Bessel low-pass 16th order Bessel low-pass 8th order Butterworth low-pass 16th order Elliptical low-pass |
Filter Stop Band Settings (Hz) | 0.1, 0.25, 0.5, 1.0, 2.5, 5.0, 10, 25, 50, 100, 250, 500, 1K, 2.5K, 5K |
Sensor Power Outputs |
Number of Outputs | (2) sensor power outputs (may be shared by multiple sensors) |
Output Voltage | 3 to 15VDC, software configurable per output |
Output Current | 50mA maximum per output |
Output Protection | 3 to 15VDC, software configurable per output |

TC10
Thermocouple Input Module

The TC10 module is the cost per channel leader in precision thermocouple measurement, offering multiple thermocouple type support and precision fast-response cold-junction compensation for accurate measurements under extreme conditions.
Thermocouple Inputs |
Number of Inputs | (10) differential thermocouple inputs |
Thermocouple Types | B, E, J, K, N, R, S, and T, selectable per channel |
ADC Resolution | 24-bits |
ADC Sampling Type | Simultaneous time-aligned sampling of all channels |
Measurement Resolution | 0.1°C |
Cold Junction Compensation | Integrated in the custom I/O connector for excellent stability during module temperature swings |
Grounded Thermocouples | Supported |
Overvoltage Protection | >100V |
Output Data Rate | Up to 200Hz per channel, configurable per channel |
Anti-Aliasing Filter | 4th order precision Butterworth, cutoff 100Hz |
Configurable DSP Filter Characteristics | 8th order Bessel low-pass 16th order Bessel low-pass 8th order Butterworth low-pass 16th order Elliptical low-pass |
Filter Stop Band Settings (Hz) | 0.1, 0.25, 0.5, 1.0, 2.5, 5.0, 10, 25, 50, 100 |

SPS16
Sensor Power Supply Module

The SPS16 module can provide power to a wide range of sensors to reduce wiring complexity and eliminate the cost and space consumed by additional external power supplies. This module is typically used in combination with an EMX Analog Input module.
Sensor Power Outputs |
Number of Outputs | (16) precision sensor power outputs |
Output Voltage | 3 to 15VDC, software configurable per output |
Output Current | 50mA maximum per output |
Output Protection | Short circuit protection with fault monitoring |

EMX Enclosure Specifications
A-Chassis Specifications |

Common Specifications |
I/O Modules | Support for up to (2) EMX I/O modules |
Construction | Sealed hard-anodized billet aluminum enclosure |
Rating | IP67 |
LEDs | (6) power and status indicators |
Power | 5 to 32VDC, automotive surge tolerant |
Operating Temperature | -40°C to +105°C / -40°F to +221°F |
Dimensions | 51mm x 45.75mm x 140mm / 2.01in x 1.80in x 5.51in (overall includes connectors) |
Weight | 12.7oz / 360g (typical) |
Weight |
Options | CAN Only | Ethernet and CAN |
Connectors | (2) Lemo 1F Series 5-pin for power and CAN (1) Deutsch ASDD series 41-pin for I/O | (1) Lemo 1F Series 5-pin for power and CAN (1) Lemo 1F Series 8-pin for Ethernet (1) Deutsch ASDD series 41-pin for I/O |
Communications | CAN 2.0B up to 1Mbps CAN-FD up to 8Mbps | Ethernet at 100Mbps with hardware IEEE-1588 PTP time sync CAN 2.0B up to 1Mbps CAN-FD up to 8Mbps |
EMX Enclosure Specifications
B-Chassis Specifications |

Common Specifications |
I/O Modules | Support for up to (3) EMX I/O modules |
Construction | Sealed hard-anodized billet aluminum enclosure |
Rating | IP67 |
LEDs | (6) power and status indicators |
Power | 5 to 32VDC, automotive surge tolerant |
Operating Temperature | -40°C to +105°C / -40°F to +221°F |
Dimensions | 63mm x 45.75mm x 140mm / 2.48in x 1.80in x 5.51in (overall includes connectors) |
Weight | 15.9oz / 450g (typical) |
Weight |
Options | CAN Only | Ethernet and CAN |
Connectors | (2) Lemo 1F Series 5-pin for power and CAN (1) Deutsch ASDD series 64-pin for I/O | (1) Lemo 1F Series 5-pin for power and CAN (1) Lemo 1F Series 8-pin for Ethernet (1) Deutsch ASDD series 64-pin for I/O |
Communications | CAN 2.0B up to 1Mbps CAN-FD up to 8Mbps | Ethernet at 100Mbps with hardware IEEE-1588 PTP time sync CAN 2.0B up to 1Mbps CAN-FD up to 8Mbps |
Accessories

VISION Hub to EMX/VID Cable
150-0209
Connects VISION Hub to VID or EMX, LEMO 1B 5-pin plug to 1F 5-pin plug (0.15m/6in, 0.3m/12in, 1.83m/6ft, 3.66m/12ft, 4.57m/15ft, 6.10m/20ft or 7.92m/26ft)

Cable
150-0175
LEMO 1F 5-pin plug, 180°/180° (3.66 m/12 ft, 0.301m/12in, 1.83 m/6 ft or 0.15 m/6”)

151-0033
EMX CAN termination for cable

EMX30T Octopus Cable
150-0189
10 R-type and 20 K-type connectors (0.61m/2 ft)

EMX16AI.SPS
Cable
150-0164
Unterminated (1.83 m/6 ft or 3.05 m/10 ft).

150-0185
K-type connectors (0.61m/2 ft).

151-0034
Mounts one EMX to a non-flat surface.

EMX16AI BOB Accessory
151-0035
Phoenix Screw Terminal (qty 16).
Image not available
EMX16AI BOB Accessory
151-0036
Phoenix Spring Cage (qty 16).

EMX16AI BOB Accessory
151-0037
Phoenix Spring Cage with flange (qty 16).

EMX16AI BOB Accessory
151-0038
Phoenix Screw Terminal with flange (qty 16).

AS64.HSA8DX2.SPS16-PHX Breakout Box
161-0013
16 analog channels, for inputs,XVS,SPS, 64-pin AutoSport.

AS41.AI8x2 Breakout Box
161-0014
2 AI8 boxes, (16 analog total), 41-pin AutoSport.

161-0015
2 AI8 boxes (16 analog total) 64-pin AutoSport.

161-0025
3 TC10 (10 K-type), 64-pin AutoSport.

AS64.AI8x3 Breakout Box
161-0016
3 AI8 boxes (24 analog total), 64-pin AutoSport.

AS41.AI8x1 Breakout Box
161-0017
1 AI8 box (8 analog total), 41-pin AutoSport.

AS41.TC10x1 Breakout Box
161-0018
1 TC10 box (10 K-type), 41-pin AutoSport.

161-0019
1 TC10 (10 K-type), one AI8 (8 analog) box, 41-pin AutoSport.

161-0020
2 TC10 boxes (20 K-type total), 41-pin AutoSport.

161-0021
1 A8I box (8 analog total), 64-pin AutoSport.

Cable, Autosport 41-pin to Deutsch 55-pin Connector
150-0222-12IN
EMX A Chassis Autosport 41-pin connector to EDAQ Break-Out Box Cable.

150-0223-12IN
EMX B Chassis Autosport 64-pin connector to EDAQ Break-Out Box Cable.

161-0023
1 TC10 (10 K-type), 2 AI8 boxes (16 analog total), 64-pin AutoSport.

161-0024
Two TC10 (10 K-type), 64-pin AutoSport.
Image not available
EMX BOB AI
Connector
Kit
151-0048
For any EMX modular BOB with an analog input module. Includes connector, contacts, cable clamp kit, and pinout card.
150-0227
Connects EMX to PC Ethernet, LEMO 1F 8-pin plug to Ethernet plug. Standard Temperature range -30 to 75C)
150-0227-HT
Connects EMX to PC Ethernet, LEMO 1F 8-pin plug to Ethernet plug. High Temperature range -55 to 150C
All specifications are subject to change without notice.