A8 Serial Interface
- Support for high speed ECU data acquisition, calibration and flashing through OCDS, Nexus, or DAP2 debug interfaces
- Fast validation and synchronization of ECU code calibration data
- Dynamic data rates allow easier configuration of the ECU acquisition
- Intelligent flashing by optimizing algorithms that shorten flash time and minimize memory degradation caused by repeated operations
- Dynamic overlay support that allows calibration of memory larger than available emulation memory
- Power Management for minimal current draw from target; including low current sleep mode
Configuration
| Supported Microcontroller Families | Freescale MPC5XXX, S12x JTAG Infineon TriCore TC17XX/TC2XX/TC3xx JTAG Infineon TriCore TC2XX/TC3xx DAP2 Renesas RH850, V850E2 JTAG (Can support most processors with a real-time debug port.) |
| Digital Voltage | (4) Power and Activity Status |
| Digital Current | USB 2.0 full speed or Ethernet |
Performance
| Data Rate | Up to 150 32bit data items/ms |
| Number of Data Items | 1200/6000 |
| Sample Time Period | 100 μs |
| Simultaneous DAQ Rates | 32 dynamic |
Operating Conditions
| Power Supply | External source of 5-30 VDC |
| Operational Current (average) | 65 mA |
| Quiescent Current Draw | 9 μA |
| Temperature Range | -40 ⁰C to max +105 ⁰C -40 °F to max +221 °F |
Microcontollers
| Micro Family | Interface | ATI Product |
| MPC5xxx | JTAG Interface | A8 Serial Interface Modules |
| Micro Family | Interface | ATI Product |
| RH850 | JTAG Interface | A8 Serial Interface Modules |
| Micro Family | Interface | ATI Product |
| TriCore TC17xx/TC2xx/TC3xx | JTAG Interface DAP2 Interface | A8 Serial Interface Modules A8 Serial Interface Module |
Mechanical
| Dimensions | 60.1 x 45.7 x 10.6 mm / 2.37 x 1.80 x 0.42 in |
| Weight | 105 g / 3.70 oz |
Accessories
150-0066
USB A/LEMO 0B 5-pin plug (30.5cm/12in or 2.4m/8ft)
150-0118
USB-A plug to LEMO 0F 5-pin plug (1.31m/4.3ft, 2m/6.6ft or 2.44m/8ft)
Internal Cable
(LEMO 0F)
150-0187
USB LEMO 0F 5-pin socket to JST 10-pin plug (5IN)
Power JST 2-pin plug unterminated (17.7cm/7in or 0.3m/12in)
Image not available
150-0073
DC Power LEMO 0B 3-pin plug to Banana Jacks (1.83m)
USB-A to LEMO 0B 5-pin plug Shield connected (2.44m/8ft)
150-0182
USB-A to LEMO 0F 5-pin plug Shield connected (2.44m/8ft)
Coldstart 6-pin JST to 1 wire unterminated (25.4cm/10in)
Image not available
150-0186
USB LEMO 0B 5-pin socket to JST 10-pin plug, (12.7cm/5in)
Image not available
10-pin header to 16-pin OCDS (12.7cm/5in)
A8 Pwr 3-pin JST to unterminated (30.5cm/12in)
Image not available
LEMO 1F 8-pin to JST 14-Pin; (12.7cm/5in)
A8 Ethernet RJ45 to LEMO 1F 8-pin (3m/10ft, 4.6m/15ft, 7.6m/25ft, 15.2m/50ft)
Image not available
Coldstart 6-pin JST to 1 wire unterminated (25.4cm/10in)
JST 12-pin 2MM plug to LEMO 0F 5-pin socket (12.7cm/5in)
Image not available
SFMC 12-pin to SFM 10-pin FlexBd (15.2cm/6in)
150-0227-HT
Connects the CTE and EMX via a LEMO 1F 8-pin to an RJ45 connector to either an Ethernet Switch or a laptop
All specifications are subject to change without notice.
